Seal Kit for 217, 217S Backhoe Boom Hydraulic Cylinder Ram serial number 430001 and up to 900000 with 75mm chrome rod diameter.

The serial number tag is located on the right side above the base of the loader lift cylinder, the machine serial number starts with USA or SLP, the serial number is the last 6 digits.

If you have any questions please call 207-744-4028 or TOLL FREE 877-977-KITS.

Kits do not include instructions, read and follow equipment manufacturers' instructions for replacing seals. Some kits may include extra parts because they are made to fit the design variations of a particular model. Kits for rod glands with pressed in metallic bearings (such as bronze) generally will not contain a replacement bearing, however phenolic & plastic bearings are normally included. If a bearing is available separately we will let you know. Because seal designs are continuously improving, and because of possible previous repairs, some kits may have a different seal design than the seal you remove, however, unless the original seal grooves were machined in a previous repair the replacement seals should fit & function properly. Never attempt to service a pressurized cylinder, or a cylinder connected to a load, never use air or hydraulic pressure to disassemble a cylinder. These are top quality aftermarket replacement parts, we are not affiliated with any equipment manufacturer.

991/00144