Hydraulic Seal Kit for Ford 555A 555A-XL 555B Loader Bucket Cylinder, All models take the same kit 1 kit per cylinder
If you have any questions please call 207-744-4028 or TOLL FREE 877-977-KITS.
If this isn't exactly the part you're looking for please email us & include the equipment make, type (i.e. backhoe-loader, bulldozer, loader etc.), equipment model number, what the cylinder does (i.e. bucket, boom, blade, etc.) & if you have it, the cylinder number, OE part number, or equipment serial # etc. We will hunt for the right kit for your machine & send you a link to the listing if it is available.
Ford cylinders of this type have unitized pistons, the wear rings on the piston are not replaceable, only the yellow seal in the center of the piston is replaceable, this is the same as the OEM Ford kits. Do not remove the wear rings from the piston. If the wear rings are damaged or if you have removed the wear rings, the entire piston must be replaced, please contact us if you need a replacement piston. Kits do not include instructions, read and follow equipment manufacturers' instructions for replacing seals. Some kits may include extra parts because they are made to fit the design variations of a particular model. Kits for rod glands with pressed in metallic bearings (such as bronze) generally will not contain a replacement bearing, however phenolic & plastic bearings are normally included. If a bearing is available separately we will let you know. Because seal designs are continuously improving, and because of possible previous repairs, some kits may have a different seal design than the seal you remove, however, unless the original seal grooves were machined in a previous repair the replacement seals should fit & function properly. Never attempt to service a pressurized cylinder, or a cylinder connected to a load, never use air or hydraulic pressure to disassemble a cylinder. These are top quality aftermarket replacement parts, we are not affiliated with any equipment manufacturer.